国产单亲乱l仑www高难度_国产成人亚洲精品日韩_色视频在线观看免费播放_高干病房玩弄人妻双飞_亚洲国产网站在线看_久久99综合国产精品亚洲_黄站无毒不卡秒播网站免费观看_欧美特黄a级高清免费大片_亚洲黑人一级毛片操_女性裸体无遮挡无遮掩视频

Supports up to 25.78Gbps bit rates Hot-pluggable SFP+ footprint 850nm VCSEL laser and PIN photodiode 300m over 50/125 um OM4 200m over 50/125um OM3 Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monit

Adopt male-female structure, standard size, convenient and fast connection. High precision ceramic insert and sleeve are adopted to achieve high precision alignment of connector, so as to ensure long-term stable mechanical and optical properties. Good mechanical performance, can meet the working e

Supports 850Gbps Single 3.3V Power Supply Power dissipation < 15W 8x53.125GBd (PAM4) Electrical Interface MPO-16 Connector APC Case Temperature Range: 0°C to 70°C VCSEL Transmitter PIN and TIA Array on the Receiver Side I2C Interface with Integrated Digital Diagnostic Monitoring Safety Cert

Supports 206.25Gb/s(8x NRZ 25.78125Gbps) aggregate bit rate Reach up to 70m (OM3) or 100m (OM4) over MMF 8x 850nm VCSEL array and PIN photo-detector array Internal CDR circuits on both receiver and transmitter channels Single MPO-16 receptacle Compliant with QSFP-DD MSA, IEEE 802.3bm 100GBASE-S

Hot-pluggable QSFP-DD form factor Supports 103.1 Gb/s aggregate bit rates Power dissipation < 8W RoHS-6 compliant (lead-free) Commercial case temperature range 0°C to 70°C Single 3.3V power supply Maximum link length of 100m on multimode Fiber (MMF) with FEC MPO receptacles I2C management in

1. The fiber fixation and protection function: Fiber inlet, fixation, and protection device should be provided. The fibers will be protected from being damaged when they are let in and fixed in the frame through these devices. The metal parts of the cables are insulated from the machine. The metal

•4*1G/2.5G/10G SFP+ slots uplink，16*10/100/1000Base-T+ 8*1G SFP/RJ45 COMBO ports downlink, 1* RJ45 console interface for switch basic management and setup •Layer 3 routing features: Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP •Port aggregation: Supports GE po

·Water-proof design with IP-65 Protection Level ·Integrated with splice cassette and cable management system ·Manage fiber in a reasonable fiber radius condition ·Easy to maintain and extend the capacity ·Fiber bend radius control more than 40mm ·Suitable for the fusion splice or mechanical spl

● 1*10/100Base-TX RJ45 PoE port, 1*100Base-FX SFP(/SC/ST/FC optional) fiber port ● Wide-Range Redundant Power Design DC 44~57V input, with polarity reverse/over-voltage protection ● Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard ● Powerful Dip switch function: 1.LFP; 2. Flow co

* 8× 10 Gbps SFP+ Ports enable high-bandwidth connectivity and non-blocking 160 Gbps switching capacity. *Compatible with existing Cat6A or better cabling *Support Jumbo frame *Complete LED indicator for operation status diagnosis *Support G.8032(ERPS), IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802

Fully modular design, full frontal operation, integrated fusion and wiring Large diameter coiling design keeps the bending radius of pigtails and patch cords above 40mm Integrated drawer type tray, which can be pulled out during operation and put back in when finished Suitable for ribbon and non-

●IEEE 802.3at, IEEE 802.3af PoE standard compliance ●Provides DC 48V power over RJ45 Ethernet cable to devices with Ethernet port ●Supports a maximum of 30 watts output power ●Support PD detection and PD classification ●Support super large video traffic ●Auto-negotiation support on RJ-45 port