Choice of SC, ST or LC connector for multimode and single mode DIP switch configuration for link fault signalling and fiber auto/force mode Support LFP (Link Fault Pass-through) Function Supports packet length up to 1600bytes Supports operating temperature range -10°C to 60°C Built-in surge pro
Description Parameter Application• 3R Repeater • Support Jumbo Frame • Transparent Transport and very low delay • Support ITUT prescribed DWDM/CWDM wavelength • Support DMI function for SFP+/XFP fiber module • Support PRBS31 Pattern Generator and Checker function • Support hot pluggi
Description Parameter ApplicationUS/EU/UK/CN/AU/JP style optional 5V1A,5V2A,5V3A optional 100% tested, pass CCC/CQC certification
Description Parameter ApplicationOptical port rate: supporting 2Mbps, 155Mbps, 622Mbps, 1.25Gbps, 2.5Gbps; SFP slot design, optical modules can be configured according to actual needs Emission wavelength: support the WDM wavelength specified by ITU-T; Transparent access: support flexible and transparent access to services such a
Description Parameter Application• 10G/5G/2.5G/1G/100M Copper to 10GBASE-X SFP+ Media Converter SPOTLIGHT • Comply with IEEE802.3an/ae standard • Copper port 155M/1/25G/2.5G/5G/10G auto-negoiation,Optical port support downward compatible with 5G/2.5G/1.25G/155M optical module • Supporting full-duplex/hal
Description Parameter Application· Protocol supported: IEEE802.3z 100BASE-SX/LX · Supporting full-duplex and half-duplex network communications; · Capable of mutual conversion between 850nm multi-mode fiber and 1310nm/1550nm single-mode fiber; · Support max speed of 1.25Gbps · Fiber port support SC、FC、ST、LC · Supporting direct
Description Parameter ApplicationProduct Features: Modular rack design with a flexible structure, sixteen slot 2U chassis Master-slave architecture, providing management modules (master and slave), up to four chassis can be cascaded for management Supports display and configuration of complete system information Port speed limi
Description Parameter Application■Protocol: IEEE802.3u 100BASE-FX ■Support full duplex and half-duplex network communication, with auto-negotiation capability; ■Capable of mutual conversion between 850nm/1310 multi-mode fibers and 1310nm/1550nm single-mode fibers ■support direct and transparent transmission of packets in diffe
Description Parameter ApplicationPhysical Port One 10G/5G/2.5G/1G/100BASE-T RJ45 interface with auto MDI/MDI-X function One 10GBASE-X SFP+ slot interface Layer 2 Features IEEE 802.3u/802.3ab/802.3bz/802.3ae Ethernet standard compliant Supports auto-negotiation and 100Mbps half/full duplex and 1/2.5/5/10Gbps full duplex mode
Description Parameter ApplicationSPOTLIGHT • Comply with IEEE802.3an/ae standard • 10G Base-T to 10G Base-R SFP+ or XFP conversion • Supporting full-duplex/half-duplex working mode with automatic negotiation function • Direct/Cross Automatic Identification of Supporting Cables • Supporting Loopbac
Description Parameter Application• Accommodates up to 16 media converters operating under different protocols • Supports two load sharing, hot swappable power supplies • Two serviceable high volume cooling fans • LED status panel with fan and slot and power LED • Supports slot power isolation R
Description Parameter ApplicationProduct highlights •Support Jumbo Frame •Compatible with 5G/2.5G/1.25G downlink •Transparent Transport and very low delay •Support ITUT prescribed DWDM/CWDM wavelength •Full State Led display •Easy installation •UTP cable length detection(only RJ45 in
Description Parameter Application