1, 4*Copper port 10/100Base/1000T auto-negotiation (RJ45 interface); 2, Transmission distance: multimode up to 550m, singlemode up to 100km; 3, Transmits 1 Bi-directional half duplex 485 signal; 4, support IEEE802.3, IEEE802.3u, IEEE802.3x network standards; 5, store-and-forward switching mode;
Description Parameter Application● 1*10/100/1000Base-T RJ45 PoE port, 1*100/1000Base-X SFP(/SC/ST/FC optional) fiber port ● Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard ● DC 44~57V input, redundant power supply with polarity reverse/over-voltage protection ● Complies with IEEE802.3af PoE and IEEE802.3at PoE+ stand
Description Parameter ApplicationLayer 2 Features High performance Store and Forward architecture IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation 9K jumbo frame supported in 10/100 or 1000Mbps duplex mode Automatic address learning and address aging Industrial Case and Installa
Description Parameter ApplicationUniversal AC input/ full range Protections: Short circuit/ Over load/ Over voltage Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 isolation class 2 LED indicator for power on 100% full load burn-in test 2 year warranty
Description Parameter Application• Adopt Taiwan 100MHz processor • 3-in-1 RS-232/422/485 interface Max.921.6Kbps Serial interface and 10/100 Mbps Ethernet • Supports 4-wire and 2-wire RS-422 and built-in terminator • Supports industrial 12-24 VDC power input • Terminal block accessories for easy RS
Description Parameter Application1.Auto-recogninition serial signal rate, zero delay automatic transmission 2.500Kbps the highest rate 3.Supply three interface (RS232/485/422) in one model 4.Transmission distance: Multi-mode 2KM, signal-mode 20-100KM 5.Provide both DB9&Terminal block connector for RS232, selectable by side DIP
Description Parameter Application• Supporting two 10/100M copper and one 100M Optical Port • Optical port SC/ST/FC optional and distance 2~120km optional • Optional 24V/220V power input • Industrial IP40 Protection grade • Support Din-rail and wall-mount installation
Description Parameter Application● 1*10/100Base-TX RJ45 PoE port, 1*100Base-FX SFP(/SC/ST/FC optional) fiber port ● Wide-Range Redundant Power Design DC 44~57V input, with polarity reverse/over-voltage protection ● Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard ● Powerful Dip switch function: 1.LFP; 2. Flow co
Description Parameter ApplicationIndustrial rail designed specifically for harsh industrial environments Provides 8x10/100,2xRS232/422/485 serial port,2x1G SFP optical ring interfaces, wire-speed transmission bandwidth 1000M; RS232/485/422 channel can transmit from 0-115200 adaptive baud asynchronous serial data The device com
Description Parameter ApplicationGeneral AC input / full range Protection function: short circuit / overload / overvoltage Cooling by free air convection Can be installed on DIN rail TS-35 / 7.5 or 15 Sol II LED power indicator 100% full load burning test 1 years warranty
Description Parameter Application• Support RS232/RS485 or RS422 • Ethernet accessory • Internal webpage to control and monitor • Auto query Modbus RTU/ASCII Slave device • Modbus RTU/ASCII to Modbus TCP • 10/100Mbps ethernet interface, support Auto-MDI/MDIX • Baud rate support 600bps~
Description Parameter Application1. Fiber interface support double fiber (SC/ST/FC) or single fiber (SC/ST/FC) 2. Serial port support 2Ch RS485 or 1Ch RS422 or 1Ch RS232 interface 3. When used, it can be one side RS-232, one side RS-485 4. Zero delay automatic forwarding, asynchronous point to point transmission 5. Automatic de
Description Parameter Application