The HT-P1000-XXX is a Gigabit Power over Ethernet Injector with one Ethernet Input (data only) port and one Output (data + power) port that is designed for small or medium network environments. The HT-P1000-XXX supplies remote power for new applications such as wireless access points, pan-tilt-zoom (PTZ) IP cameras and videophones. It complies with IEEE 802.3at PoE standard and is backwards to IEEE802.3af. It can work with 10/100Base-T networking devices and emerging 1000Base-T devices such as Wi-MAX and wireless IEEE 802.11n access points. By adding a PoE Splitter to existing non-PoE networking equipment, installing networking products such as Access Points and IP cameras can easily be performed. Wireless device deployments are easily located without the need for power outlets and network administrators don’t need to use AC power adapters anymore. For all the function featured in HT-P1000-XXX, people can get the benefit of flexible network installation at lower cost, less downtime.
|
Model
|
HT-P1000-15W
|
HT-P1000-30W
|
|
Interface
|
POE port：1*10/100/1000M RJ45
LAN port：1*10/100/1000M RJ45
|
|
Network media
|
10Base-T CAT：3，4，5 UTP ≤100m）
100Base-TX：CAT 5 UTP（≤100m）
1000Base-T：CAT（≤100m）（PSE803G PSE802G Supply）
|
|
LED Indicators
|
Power/PoE Status
|
|
Size
|
120mm*62mm*39mm
|
|
Operation temperature
|
Operation temperature：0℃~40℃（32℉~104℉）
|
|
Storage temperature：-40℃~70℃（-40℉~158℉）
|
|
Operation humidity：10%~90% RH
|
|
Storage humidity：5%~90% RH
|
|
Input voltage
|
AC 100V-240V～50-60HZ
|
|
Output power
|
48~56V/15.4W
|
48~56V/30W
|
|
Standards and Protocols
|
IEEE802.3af
|
IEEE802.3at
|
|
POE Pin
|
1,2(+),3,6(-); 4,5(+)/7,8(-) mid-span
|
|
Basic function
|
Port Power Priority Function
|
|
Compatible with the IEEE 802.3at/af Standard Received Equipment (PD)
|
